How to replace the SD Card Reader Board | HP ENVY All-in-One PC 32-a0000 Desktop PC series | HP
Articles Blog

How to replace the SD Card Reader Board | HP ENVY All-in-One PC 32-a0000 Desktop PC series | HP

January 6, 2020


How to replace the SD Card Reader Board Before you begin: Remove the display stand and rear cover. Removal – Peel back the retention tape and disconnect the card reader board cable from the connector on the card reader board. Remove the two 5 mm P2 Phillips-head screws that secure the card reader board to the chassis. Lift the card reader board off the alignment pins on the chassis and remove. Replacement Place the card reader board onto the alignment pins on the chassis. Replace the two 5 mm P2 Phillips-head screws that secure the card reader board to the chassis. Connect the card reader board cable into the connector on the card reader board and replace the retention tape.

Leave a Reply

Your email address will not be published. Required fields are marked *